Lumb Bank cardigan

 

We (the retreaters) have revealed our finished and mostly-finished cardigans to each other and to Nic Corrigan and are cleared to show them to whomever we please. So here is the cardigan I mostly made while in Yorkshire, but finished here at home. There, I used the assigned machine, which was a Silver Reed punchcard (a Zippy plus, which is older than a SR 360 I think). Here, I used my Brother KH965i. 

The Lumb Bank Slipover pattern is named after the location of the retreat (the steep hill) and Nic designed it with or without sleeves and with 3 different stitch patterns that evoke different aspects of the location - a leafy canopy, library bookshelves and mullioned windows. These designs can be used in whichever locations the maker wants - the entire sweater, panels, single motifs or otherwise. 

Even though all of us were working with a limited colour palette and the same pattern, every cardigan was totally different. This is a pattern that allows you to really make it your own. 

I chose to place the leaf pattern on the centre fronts and at the lower edge of the side fronts and back. One punch card repeat perfectly aligned with the pocket opening and continues around the back. 

I didn't know (or possibly had failed to notice or forgotten) that stranded knitting is always longer than the equivalent number of rows in plain stockinette. I found I had to unravel about 10 rows of my centre fronts and re-cast off by hand to even them up with the side fronts.

As you can see, this is a boxy design with relatively narrow 1x1 ribbed sleeves. There is virtually no shaping in the body - no back neck drop, no armscye shaping. The shoulders are shaped with short rows. 

We were able to examine and try on some samples at the retreat, and based on my assessment I made some changes so it would fit me better. 

There is a V neck at front, which is fully fashioned. As designed, it is quite a bit lower than the front of my cardigan. I knit extra rows to raise it up by about 10cm. 

I also decreased the width of the back by approximately 4cm (there is a centre back seam) because my back is narrow. 

Finally, I lengthened the back overall and added a back neck drop. This helps the cardigan sit correctly on my shoulders. 

I did a couple of things differently in the construction as well. 

The samples had seams sewn with wrong sides together. I made mine the conventional way. 

The instructions asked for all body pieces to be taken off the machine on waste yarn rather than cast off, and then seamed using a linker. I wanted the stability of a cast off edge at the shoulder and back neck. Also, I was taking the pieces home in my luggage and wanted the stitches to be extra secure. So I cast off around the gate pegs on all but the sleeves. I left the sleeve stitches live but cast off the waste yarn for security.

I totally recalculated the neck band so that it had a seam at CB rather than (as designed) two seams above the V crossing of the front neck. The structure of the band is many stitches cast on in full needle rib, and then every 2nd stitch transferred on the ribber bed. It looks like 1x1 ribbing on the ribber side, which is the public side once attached, and like FNR on the main bed side. It's OK but not my favourite ever neck band technique. My thought was that it needed to be stretched much more than the pattern indicated - i.e. that the pattern instructions would produce a neck band that is overall too long for the opening. I am glad I shortened it and think I could have been even more aggressive as it is not sitting quite flat at the side neck. 

I made the pockets exactly
as the pattern instructed. They are just an extra length of knitting within the side fronts (knitted with the few stitches to either side in hold). I made them in the contrasting colour. 

I attached the lower corners to the seams so they don't flip up (copying what I saw in Nic's samples).

I assembled the cardigan mostly on my linker but had to attach the band by hand due to technical issues too tedious to describe. 

New features/experiences associated with this project:

• 
  Intensive knitting experience - no time to ruminate, had to make quick decisions, jump in and just knit. That was surprisingly tiring!
• Properly fully fashioned ribbing (behold at right the underarm seam). 
  
• Put almost the whole thing together using my linker, which hasn't been my favourite piece of kit. 

BTW the actual colour of this cardigan is somewhere between how it appears in the inside and outside-in-the-sun photos. The yarn is very heathery. It's Gardiner Yarns SS11 Shetland, 100% wool. I'm not convinced I got all of the spinning oil out of it when I washed it and may attempt to rough it up some more to make it a bit softer. 

Once I finished it I realized I didn't have a lot of tops that would look good with this. I'll have to make something!

First ever MKC retreat

Last month, I went to a machine knitting retreat. It was AMAZING! 

Five days in a beautiful house perched halfway down a steep hill (Lumb Bank) outside a quaint, tiny village (Heptonstall) outside a quaint small town (Hebden Bridge) in the Calderdale district of Yorkshire, England, with 15 like-minded knitters, 3 wonderful hosts and 2 expert instructors. 

I'm still processing it. 

For now, enjoy these photos.

Here is the house. It's the Ted Hughes Arvon Centre at Lumb Bank. I took this photo from across the very steep valley. The house is an 18th century millowner's house that once belonged to Ted Hughes, who was for a time the poet laureat of England and the husband of Sylvia Plath. 

Another view of it from the "road" that leads to it. It's really not more than a track. 

This is the view from the front lawn of the house, looking out more or less in the direction from which I took the first photo. 

And here is the cat, Ted Hughes, who is not allowed in the house at all.

Our knitting room was in "the barn". 

This was before we started, which explains why it is so neat.

On day 1, we were introduced to a forthcoming pattern (holding a retreat seems an elaborate way of finding pattern testers LOL) and got to choose our yarn.

My knitting throne. I lucked out!

Proof that I sat there and worked. I was concentrating!

In four very intense days I knitted all of the pieces of my (secret project). It is now finished and this coming week, we retreaters are meeting up by Zoom to unveil our finished items to each other. Afterwards, Nic (Corrigan, founder of the Machine Knit Community) will release the pattern to the world.